Technology of production is based on scientific achievements and good production practice. Surface for galvanizing of material is being prepared according to the following technological operations:

1. Degreasing – in a water dilution of biodegradable surfactants with temperature. Time needed to degrease material is approx. 10-20 minutes.
2. Pickling – in 4-16% hydrochloric acid on room temperature. This process lasts 20-60 minutes.
3. Rinse – in water on room temperature, done by completely submerging and emerging of material.
4. Fluxing – in a water dilution of zinc and ammonium chloride. Done by submerging and emerging material in flux dilution.

Prepared material surface is dried in a drier and galvanized with light submerging in melted zinc and emerging on temperature of 450 degrees Celsius. Finished product is then cooled and afterwards a final inspection is done, additional treatment, visual examination and measuring of zinc coating thickness.